Realoldspower.com

gearheads78 · Joined: 25 Mar 2007 Posts: 1490 Location: Dallas TX

Who sells or reproduces them? I can reuse mine if I have too but the plastic is all pretty brittle. I would like to replace if I can.

Thanks
_________________
-Richard

66' Cutlass convertible Resto-mod touring

The NEW American way..... I work hard so you won't have to.

buzzbomb · Joined: 17 Jul 2005 Posts: 6456 Location: Wickliffe ohio

just about any of the repop houses have them and if not look on e-bay or here at

http://cgi3.ebay.com/ws/eBayISAPI.dll?ViewUserPage&userid=altha1
_________________
The official R.O.P. SEMI crotchety old bas*tard

http://s38.photobucket.com/albums/e136/lumanutt/

gearheads78 · Joined: 25 Mar 2007 Posts: 1490 Location: Dallas TX

buzzbomb · Joined: 17 Jul 2005 Posts: 6456 Location: Wickliffe ohio

sometimes you have to go with the closest thing that will work . Fla auto fastner are nice people to deal with. If you snap a pic of exactly what you need and send it to john with the dimentions he may be able to match it up
_________________
The official R.O.P. SEMI crotchety old bas*tard

http://s38.photobucket.com/albums/e136/lumanutt/

daveh · Joined: 10 Mar 2005 Posts: 5638

Contact Les at 248-542-3039. He has a bunch of ones that he sells from time to tiime on ebay under the name: flaisheratflashnet I don't know f they're the OEM type or not, but do know they work. He's restored numerous 66's (and many other years, too).
_________________
Aspire to Inspire, before you Expire.........

gearheads78 · Joined: 25 Mar 2007 Posts: 1490 Location: Dallas TX

gearheads78 · Joined: 25 Mar 2007 Posts: 1490 Location: Dallas TX

Back too the top. I'm still looking for these clips. Its for the really wide 66 moulding over 2" wide. The largest clips I have seen is for 1 1/2 - 1 3/4

I tried that number above and still have not got a call back. I just left another mess but in case I don't hear back I would like another source.

Thanks
_________________
-Richard

66' Cutlass convertible Resto-mod touring

The NEW American way..... I work hard so you won't have to.

gearheads78 · Joined: 25 Mar 2007 Posts: 1490 Location: Dallas TX

I think I am good now. The guy Dave H recommended just called me back and has them
_________________
-Richard

66' Cutlass convertible Resto-mod touring

The NEW American way..... I work hard so you won't have to.

66-442 · Posted: Mon Jan 26, 2009 10:22 pm Post subject:

Fusick has the square clips that join the w/o mldgs to the side mldgs and the rear of the front door side mldg clips new. They say it takes two of the door mldg clips per door but it only takes one per door. Any supply house that has Eveco clips has the butterfly side mldg clips. That means all of the side mldg clips are now available new,no need for rusty clips.
_________________
OLDSMOBILE=Made it's way by the way it was made.